“Let’s get ready for the winter with how to select the appropriate use of the water heater”
When you would like to select a new water heater for your home, choose a water heating system that will not only provide enough hot water but also that will do so energy efficiently, saving you money. This includes considering the different types of water heaters available and determining the right size and fuel source for your home.
Year-End is just around the corner, the winter chill is coming. Whenever we think of taking a bath, it really makes us shiver every time. Has the water heater been installed at your home? If not, then our ZMARTBUILD has the good article about how to select the water heater for you to read.
Many people when buying the houses and the condominiums, some developers will prepare the hot and cold water system for your houses and your condominiums. Many people always mistake and misunderstand that all the water heater systems are the same. But actually the systems of the water heater for the hot and warm water are not the same. We have the water heater and then we don’t have to be shivering because of the winter chill.
Actually, the systems of the hot water and the warm water are not the same. The differences of these two systems are the installation of the systems since the beginning of the construction of the house. The use of energy is also different as well as the usability. Which type is good and which type is not good? Which type is suitable for which application? In this article, we can answer all the questions about how to select the water heater.
Crompton Arno Neo – Water Heater
We would like to start with the water heater for the warm water. This system is generally found in many houses. The homeowner does not have to prepare anything in advance. The homeowner just buys the water heater and get it installed right away. The working principle of this system is very simple. The water with the room temperature will flow into the water heater and flow out from the shower. The most important thing of the water heater for the warm water is that the installation of the ground wire to prevent you from the electrical shock. There are two types of water heater for the warm water.
Tankless coil – The working principle of this system is that the water which flows into the water heater will go through the water pipe or the hot copper coil with the medium diameter. Consequently the water will become hot faster. This water heater is handy, not so big. However, the concern point is the possibility to have the blockage from lime stone in the pipe which will obstruct the constant flowing of the water.
Crompton Solarium Qube – Water Heater
Water heater with the boiling tank – the water for this type of the water heater will flow into the boiling tank which is made from the copper or the synthetic material. It is the same thing when you boil the water. This type of the water heater will take some times to boil the water in the tank.
The copper is used to make hot water tanks. This copper made boiling tank will be heat resistant. However, the dregs or the scale can be found in the boiling tank. Therefore, the frequent maintenance of the boiling tank should be kept.
The synthetic boiling tank is made from the high quality enginerring plastic which is called Grilon which is the brand name for engineering plastics. The products in this group are semi-crystalline polyamide materials characterised by the following properties: high strength and stiffness. high impact strength. high heat deflection temperature). This type of engineering plastic is found in the automobile tank which can certainly be heat resistant.
If you would like to use the engineering plastic made boiling tank, you should use one piece of engineering plastic boiling tank and seamless.
You should use the good quality of the engineering plastic to prevent the leakage and extend the service life of the boiling tank.
Crompton Solarium Neo – Water Heater
The water heater for the hot water
The working principle of the water heater for the hot water is as follows: There are two types of water pipe – the water pipe for the hot water and the water pipe for the cold water. The water which flows into the water heater will be the hot water which will be mixed with the cold water again when using.
Therefore, we will see that there are two types of taps which can be adjusted for the level of the hot water and the cold water. Since the hot water will be made directly from the water heater therefore more energy will be used and consumed (some water heaters will use more than 10,000 watts of energy). The higher the watt of the water heater, the faster the water heater can make the hot water. For example, the water heater for the hot water with 3,000 watts and the water heater for the hot water with 6,000 watts. Over the same period, the water heater for the hot water with higher watts, the making of the hot water will be faster than the water heater for the hot water with less watts, however the water heater for the hot water with higher watts will consume more energy and electricity.
Although the water heater for the hot water will consume more electricity, the water heater for the hot water will also have some benefits e.g. strong shower with higher water pressure because the water comes from two pipes of the hot water and the water with the room temperature.
The installation of the water heater for the hot water can be made once. The hot water can be delivered to the kitchen, the toilet, the wash basin or the bathroom. It can be used for all. But for the water heater for the warm water can be used and installed for one location.
The type of the water heater for the hot water will be similar to the water heater for the warm water. Both of them have the tankless coil and boiling tank with the electrical coil to make the hot water directly. Once the water is hot, the hot water will be stored in the storage tank and the hot water will be distributed to various areas and locations. Both of the hot water and the cold water will be mixed together and the temperature will be adjusted by the mixed tap.
The water heater is the electrical home appliance; therefore, checking the health of the ELCB (Earth Leakage Circuit Breaker) is very important and simple and you can do it easily by pressing TEST Push Button Switch of ELCB. The test push-button will test whether the ELCB unit is working properly or not.
For the selection of the water heaters for those people who buy the house or the condominium. We would like you to check whether the developers prepare any systems for the homeowner or not. If the developers install the system of the water heater for the hot water, then you should select and buy the water heaters for the hot water. If the homeowner uses the wrong system of the water heater, the water heater can easily get damaged and have the malfunction.
If you would like to see the real products before making a decision to buy, you can contact our showroom or contact our staff at Tel. +8801707410161 or whatsapp here >> https://api.whatsapp.com/send/?phone=66818480870&text&app_absent=0
Interested in shopping our products: https://www.bangladesh.zmartbuild.com/
Subscribe to receive update news and every trends about construction in INDIA